Single 12'' line array system does't equal to small sounding! TPA Audio ...
TPA(Turbo Power Audio Company) is located in Panyu district of Guangzhou City, is one of the earliest factories in China pro audio industry since 1997. Welcome to visit TPA any time. We are looking for distributors to grow together. Our website is www.tpa-pro.com. Whatsapp/wechat: +8615918768456. Thank you.
TPA new 12” line array element KIVA
TP-600 incorporates one 12”/3” VC LF woofers, one 1.4” exit/3” VC neodymium
compression driver along with a passive crossover network, switchable passive
or bi-amped. The 90°constant
directivity horizontal dispersion pattern is maintained down to 300Hz, while
the vertical HF dispersion of 15°allows the Kiva TP-600’s to be scalable when needed.
The mechanical design of the cabinet enables vertical splay angels to be set at
0°, 7.5°
and 15°. And two NL4 connectors wired in parallel are mounted
on the rear panel. The frequency pattern control of a flown hang of 6 Kiva
TP-600’s can go down to 65Hz. The cabinet is equipped with multiple handles and
constructed by 18-layer ply wood and coated with water based painting for
environmental purpose.
TP-600 incorporates one 12”/3” VC LF woofers, one 1.4” exit/3” VC neodymium
compression driver along with a passive crossover network, switchable passive
or bi-amped. The 90°constant
directivity horizontal dispersion pattern is maintained down to 300Hz, while
the vertical HF dispersion of 15°allows the Kiva TP-600’s to be scalable when needed.
The mechanical design of the cabinet enables vertical splay angels to be set at
0°, 7.5°
and 15°. And two NL4 connectors wired in parallel are mounted
on the rear panel. The frequency pattern control of a flown hang of 6 Kiva
TP-600’s can go down to 65Hz. The cabinet is equipped with multiple handles and
constructed by 18-layer ply wood and coated with water based painting for
environmental purpose.
Type |
Compact 2-way line array element, Switchable passive and bi-amp |
Frequency Response |
50Hz – 19KHz, -10dB@55Hz |
Drivers |
1x 12” / 3” VC LF woofers 1 x 1.4” exit / 3” VC NEO HF driver |
Rated Power(RMS) |
600W(LF: 400W + HF:200W) |
Recommended Amp |
800W – 1200W into 8ohm |
Sensitivity@ |
102dB |
Max. SPL |
132dB Continuous, 138dB Peak |
Nominal Impedance |
8ohms nominal |
Finish |
Textured black paint |
Protective Grill |
Black perforated steel |
Connectors |
2 x Neutrik Speakon NL4 |
Crossover |
1.6KHz |
Dimensions |
(W)700mm x (H)354mm x (D)447mm |
Weight |
33KG |
Comments
Post a Comment